Others also read
With the arrival of CE marking of IGUs (EN1279) on March 1st, it has been agreed that thermally insulating glass units should now state U-values with 90% argon-gas filling.
Thermoseal Group, the UK’s supplier of the Thermix TX.N warm edge spacer bar and a supplier of double glazing machinery and consumables, has achieved record first quarter sales of TX.N warm edge spacer bar.
When purchasing Harvey replacement windows there are many different options for energy efficiency. As most people know, you get better performance from insulated glass than from single pane windows.
The Glassex 2007 Energy Efficiency Zone at the NEC in Birmingham proved to be an ideal platform for Thermoseal Group to address window manufacturers and sealed unit producers with its comprehensive range of double glazing consumables.
Thermoseal Group Showcase its machinery range at Glassex The Glassex 2007 show at the NEC in Birmingham proved to be an ideal platform for Thermoseal Group to address window manufacturers, fabricators and sealed unit producers with its range of new…
Double glazing firm St Helens Glass is believed to have collapsed with the loss of more than 200 jobs. It is estimated that figure could rise to more than 300 if salespeople, fitters and drivers contracted by the firm are also taken into account.
Guardian Building Products Distribution, Inc., announces its newest product with the introduction of GuardWrap™.
Saint-Gobain Isover is to build a new, 70,000-ton capacity glass wool plant in Chemillé, (Maine-et-Loire) France. The plant is due to begin production at the end of 2008, will create approximately 150 jobs.
In the context of CE Marking, most flat glass products sold in the European Union must now conform to European technical standards known as harmonised European Norms (hEN), as dictated by the Comité Européen de Normalisation (CEN).
In the period from November, 27 - 30, 2007 National United Council of Glass Industry Enterprizes «StekloSouz» with support of Ministry of Industry and Energy and Federal Agency of building and housing and communal services, under patronage of…
The Raytek GS110 process imaging system for low emissivity (low-E) glass was specifically designed to monitor one-side coated flat glass and addresses a rapidly increasing need as low-E glass becomes more widely used in the construction industry.
Receiving the Insulating Glass Certification Council's highest certification for its Comfort-Gard Plus(R) glass technology, Patio Enclosures, Inc. has become the only sunroom manufacturer to attain this distinction for the commercial and…
With proper, detailed planning, a new conservatory can add value to your property and enhance your living accommodation.
This important happening confirmed itself during the 2006 edition as the leading fair for glass industry world-wide.
UP-616 is a two-component, room-temperature-cured high performance polysulfide sealant. It also has excellent maneuverability, curing property and quality consistency.
Tendency from flat to rotatable glass sputter solutions persists Over 54.000 visitors gathered information on trends and innovations in the glass industry during the international glasstec exhibition in Düsseldorf, Germany, from 24 to 28 October.
Kommerling UK, leading manufacturer and supplier of sealants and resins is launching a number of new products into the IG and glazing market.
Optimism prevails amongst the international glass sector in Düsseldorf Visitors enthused about innovations in the fields of solar thermal systems, photovoltaics and multi-functional glass The glass industry is upbeat and looks to the future with…
Since the beginning of our activity we have always been giving importance to all possible communication instruments we could use in order to keep a constant touch with our sector.
Visit Carbone Lorraine Composants S.A.S. at Glasstec hall 13 / C08 CARBONE LORRAINE, under its leading brand name of Cerberite®, designs and manufactures an extended range of systems and components for the glass container industry, from the…
At the Glasstec 2006 exhibition in Dusseldorf, Germany, Solutia Inc. (OTCBB:SOLUQ), the world leader in the production and sale of polyvinyl butyral (PVB) interlayers, today announced its PVB interlayer business will now be known as "Saflex(r)…
2007, our aim is to give style and value to safety. A product with high design content is the outcome of a process where every detail counts.
A composite is the combination of each material’s best characteristics.Our aim is to assist our customers in dealing with the production problems they may encounter due to the continuous evolutions of the materials on today’s market.
Bostik, the global manufacturer of sealants and adhesives, will be using this year’s Glasstec (hall 17, stand B60) to launch a new product numbering system designed to simplify the product selection process for insulating glass unit (IGU)…
Hall 17 Stand A72 DAMGLASS S.L. launch at Glasstec 2006 a new generation of sandblasting machine DAM-6 and the innovative Dam-Glassnet cabin, designed for the application of "easy clean and anti-fingerprint" products.