Others also read
Kolzer was founded in 1950 and was one of the pioneers in early vacuum technology. Following on half century of experience, today Kolzer is a market leader in the high-vacuum treatment field with about 1’000 units currently operating worldwide.
Established by advanced ceramic experts at the beginning of 2007, INNOCERAM have already set up the manufacturing facility with more than 100 staff in Suzhou City, Eastern China coastal area.
General Europe Vacuum recently located in the new Facility in Buccinasco (Milan) , Via del Commercio 9 offers a variety of vacuum products.
The Fratelli Pezza production is structured over a complete and versatile range of manual, semi-automatic and automatic machinery and equipment as well as numeric-control units that match all possible requirement within the scope of glass sand-…
FAMATEC was founded in 1988 and is a certified UNI EN ISO 9001:2000 firm. We create pneumatic solutions for assisted manual movement of products during the productive process of manufacturing companies.
HIGHER PRODUCTIVITY TO INCREASE YOUR PROFITABILITY! Glaston, offering the widest-of-the-industry portfolio of products, services and well-known trademarks of Tamglass and Bavelloni, are presenting their One-Stop-Partner (OSP™) solutions for glass…
With over 30 years of experience, SOFTECO and AYROX are companies specialising in safety glass and safety glass technology.
International trade fair for machinery, equipment and systems for the processing of flat and hollow glass; glass and finished products for industry – will be hosting two important sectors in the vast glass processing panorama: Vitrum Hollow Glass…
International trade fair for machinery, equipment and systems for the processing of flat and hollow glass; glass and finished products for industry – will have a host of new offerings to showcase to the international public.
Since the beginning of our activity we have always been giving importance to all possible communication instruments we could use in order to keep a constant touch with our sector.
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curiosities” this year.The first ones concern both new products and technological innovations applied to the already existing models.
The FPS-50M3 is the largest capacity straight line vertical edger produced by SCHIATTI ANGELO Srl. This model which completes the FPS-50 series was designed to increase the performance of the older model FPS-50M2.
Since the beginning of our activity we have always been giving importance to all possible communication instruments we could use in order to keep a constant touch with our sector.
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curios” this year.
Adelio Lattuada has presented a new model at Vitrum 2005: the A.L. 7 E Cerio, an electronic straight-line edging machine for the processing of flat edge with arris, polished by liquid cerium oxide.
Without doubt a decisive factor in VITRUM 2005 being so successful for Bystronic was the fact that Bystronic, in its role as a global supplier of total solutions for the economical, application-engineered manufacture of architectural and automotive…
The public's phenomenal response at Vitrum in Milan is testimony to Edgetech's success since its launch three years ago in the greater European economic area: in EMEA, Edgetech is growing at a rapid rate.
Sevasa, amongst the leading companies of high quality satined and engraved glass, has presented its new design CriSamar® ICE at the glass international exposition Vitrum 2005, held in Milan this past October.
With the rise of shaped glass sheets in the architectural and automotive glass market, there is a decrease of glass sheets being produced in batches.
At Vitrum: Hall 15-I, Stand J04Perfect Rack Rack Management software, integrated with Perfect Cut, reduces operative time about 1-2 hours a day, and with a waste increase of only 0,5%.
Hall 15 Stand C/04Automatic CuttingThe linea 2005 wheels are produced using a particular type of hard metal obtained by means of sintering techniques applied to small dimensioned objects.
At Vitrum: Hall 15/2, Stand C 83Tubolar pull handles with lock available in a variety of diameters, manufactured in stainless steel AISI 316L.
At Vitrum: Hall 16/1, Stand C 06 - 08Dallapiccola Dario has been manufactoring racks and trolleys for glassworks since 1994, supported by his fathers 30 years experience in mechanical fabrication.
Our company Collanti Parini s.r.l. will be at Pad. 14 - B61 of Vitrum from 5th to 8th October.We'll show Vitralit® one component, UV glue for glass, Penloc® structural, two-component adhesive, special UV lamps and coloured Vitralit® for glass.
From several years on glass market, the company FORZA G ITALIA S.r.l., producer of CENTRIFUGAL SOLID/LIQUID SEPARATOR SYSTEMS, displays at its Vitrum booth H2O Global Systems that means SYSTEM OF MICRIFILTRATION that procede part of the grinding…