Pilkington Suncool™ 70/35 for solar control

Date: 28 June 2016
Source: www.pilkington.it
The Italian Government Decree 26 giugno 2015 has further reduced U values for thermal transmittance of the windows and introduced the global transmission factor of solar energy g gl+sh.

The main condition for window frames can grant thermal transmittance and solar control set by the new Act is the adoption of selective glazing with low emissivity and solar control coatings.Pilkington Suncool™ is a range of magnetron selective glass that optimally meets the requirements of the new legislation, allowing to limit solar heat gain inside the building in any situation, and environmental exposure, is located.

Pilkington Suncool™ 70/35 is the most performing of the range as for light transmission level as for solar factor and it reaches a Ug value of 1.0 W / m2K.

Photo by: Ossip van Duivenbode

Installed in face # 2 in a traditional double glazing, you get a solar factor of 37%, given enough to agree the requirements of the Decree, and to consider the global transmission factor of solar energy ggl + sh.Whether this glass in triple glazing is installed together with a low-emissivity glass (face # 5) Pilkington Optitherm™ range, the solar factor drops to 34%, or simple double glazing but with Pilkington K Glass™ N face # 4 you get a solar factor of 35% and Ug 0,9 W/m2K.

The program Pilkington Spectrum, available at the address http://spectrum.pilkington.com allows to find the best Pilkington products suitable for each application. It is a free instrument, available upon registration.

For further information visit www.pilkington.it

600450 Pilkington Suncool™ 70/35 for solar control glassonweb.com
Date: 28 June 2016
Source: www.pilkington.it

See more from these topics:

Others also read

The original shows its colours: State-of-the-art stand design and new developments at RENOLIT.
The Glass Machinery Company recently took delivery of a Fratelli Pezza easymarker UP.
Rollecate will provide the aluminium window frames and curtain walls for this project.
As part of continuous product development, Metal Technology has released a new lug that has been designed to work with short leg outer frames.
Mountain views, energy efficiency highlight new Ent Center at UC Colorado Springs.
Mappi always minimizes the impact on the customer’s production during the tempering furnace installation.

From industry

40 Corniche El-Nil,
Al Sharafain Tower Maadi,
Cairo Governorate


Mappi International Srl
Officina Meccanica Schiatti Angelo S.r.l.
Mappi International Srl

Add new comment