New Energy Technologies, Inc. and National Renewable Energy Laboratory Create Improved Process for Technology Capable of Generating Electricity on See-Through Glass

Columbia, MD – June 18, 2012 – New Energy Technologies, Inc., developer of see-through solar cells for generating electricity on glass, today announces an improvement in its manufacturing technique that should lead to higher speed, lower costs and greater durability.

Teaming with the US Department of Energy’s National Renewable Energy Laboratory, New Energy Technologies Inc. (OTCQB: NENE) has developed the use of low-cost materials and a special application technique that could help optimize the movement of electrons within the ultra-thin solar cells.This should increase the amount of electricity produced when New Energy’s see-through SolarWindow™ prototype is exposed to natural or artificial light.

Importantly, the improvement to the technology can be executed at ambient pressure and low temperatures, allowing researchers to avoid the use of materials that must otherwise be deposited using high temperature vacuum deposition. Vacuum deposition is both expensive and time-consuming and, thus, not practical for high speed and large-scale applications. Today’s innovation promotes low processing temperatures, enabling high-speed roll-to-roll (R2R) and sheet-to-sheet (S2S) manufacturing. This large-area, R2R and S2S fabrication capability and improved durability of SolarWindow™ technology are crucial for production of market-ready electricity-generating coatings on see-through glass and plastic.

Previously, New Energy, with assistance from University of South Florida and NREL, developed important improvements to New Energy’s SolarWindow™ technology, capable of generating electricity on see-through glass. These improvements include enhancements that address advancing durability, power performance, and cost-effective manufacturability – all important to the eventual commercial deployment of New Energy’s SolarWindow™ technology.

Today’s announcement marks the latest in a series of technical accomplishments that Company and NREL research teams have recently achieved.

“Over the past few months, our researchers have unveiled a virtually invisible conductive wiring system, which collects and transports electricity on SolarWindow™ prototypes, and have fabricated a large area working module, which is more than 14-times larger than previous organic photovoltaic devices fabricated at NREL,” stated Mr. John A. Conklin, President and CEO of New Energy Technologies, Inc. “Earlier, we developed our first-ever working SolarWindow™ prototype using a faster, rapid scale-up process for applying solution-based coatings.

“Together, these achievements have moved us closer to our manufacturing, scale-up, durability, and power production goals – all important factors to advancing our SolarWindow™ technology towards commercial launch,” Conklin added.

To generate electricity on SolarWindow™ prototypes, researchers creatively layer and arrange unique, ultra-thin see-through solar cells onto glass. Each of these cells is arranged in a network and interconnected by way of a virtually invisible grid-like wiring system.

Within these ultra-thin solar cells, the light-induced movement of electrons generates electricity. When SolarWindow™ prototypes are exposed to light, the light’s energy prompts electron movement through specific physical and chemical mechanisms leading to power generation.

Dr. Scott R. Hammond, Principal Scientist at New Energy Technologies, Inc., believes the discovery announced today could also favorably improve durability and shelf-life of the Company’s future SolarWindow™ products. “NREL scientists have previously published unrelated results that demonstrate dramatic improvements to the operational and shelf-life of unprotected (i.e., non-encapsulated) photovoltaic devices utilizing related materials when subjected to continuous illumination. No doubt, this is a promising and significant advancement.”

Currently under development for eventual commercial deployment in the estimated 85 million commercial buildings and homes in America, SolarWindow™ technology is the subject of ten patent filings and is the world’s first-of-its-kind technology capable of generating electricity on see-through glass windows.

NREL Scientist, Dr. Heather A.S. Platt (foreground) and New Energy Principal Scientist, Dr. Scott R. Hammond Work on Company’s SolarWindow™ Technology

600450 New Energy Technologies, Inc. and National Renewable Energy Laboratory Create Improved Process for Technology Capable of Generating Electricity on See-Through Glass
Date: 25 June 2012

See more news about:

Others also read

The Emirates Arena and Sir Chris Hoy Velodrome have just been completed, creating a new world class sporting landmark for Scotland.
Hawaii and Texas Top List of 20 States and D.C. Adding Construction Jobs Since November 2011 as Delaware and New York Trail; Vermont and Louisiana Led 19 States with One-Month Gain, D.
The EBRD is providing loans worth €110 million to Turkish glass manufacturer Trakya Cam A.Ş. that will expand its product range at home and in Bulgaria and also establish a presence on the Russian market, setting new standards in energy efficiency.
The United States is honoring its role, to the best of its ability, as the world's locomotive, although despite the positive performance of the real estate market, America seems to be recovering slower than expected.
We sincerely thank all our members, friends and visitors for being part of GlassOnWeb and its success during 2012.
SAGE Electrochromics, Inc., a world leader in the development and manufacture of dynamic glass, located in Faribault, Minn., today announced it has filed a lawsuit in U.S.

Add new comment