Lady Liberty Renovation Bolstered by Vetrotech Saint-Gobain’s Fire-Rated Glass

The Statue of Liberty National Monument reopened to the public featuring two new fire stairwells and an elevator that will allow visitors with reduced mobility (including, for the first time, those in wheelchairs) to look into the Statue’s interior structure.

Clear fire-rated glass specialist Vetrotech Saint-Gobain North America, part of the family of companies from the world’s largest building materials company Saint-Gobain, provided its highest-performing fire-resistant glass products, CONTRAFLAM® 90 and CONTRAFLAM® 120, for all exits on floors one through five in the Monument, allowing the safe egress of building occupants in the event of fire.Most notable to the renovation is the addition of a glass oculus between the third and fourth floors, providing a unique translucent experience that allows all visitors to now enjoy the landmark’s iconic interior architectural qualities; this clear glass is the largest and heaviest circular piece of glass ever manufactured by Vetrotech Saint-Gobain North America.  
 
The Statue of Liberty National Monument originally reopened to the public on October 28, 2012, after a year-long, $27.25 million renovation to make the landmark safer and more accessible. The Monument had to close the next day due to Hurricane Sandy and remained closed for repairs to the island until its celebratory reopening on July 4, 2013.
 
It is estimated that the renovations will allow approximately 30 percent more people to visit the inside of the Monument each year. Most importantly, the life safety renovations will allow those visitors to safely and comfortably experience it. Updating fire suppression systems was a critical safety component of the renovation and it required glass specialist Vetrotech Saint-Gobain to manufacture fire-resistant safety glass for the Monument’s floors, doors and stairwells. Over 425 square feet of clear multilayer fire-resistant safety glass (listed and tested with UL in accordance to UL263, UL10c and UL9 standards) was manufactured for the Monument, delivering two hours of fire resistance in the staircase partitions and 90 minutes in doorways.
 
“Saint-Gobain products are found in some of the most iconic landmarks around the world, but we are especially proud to have our U.S.-manufactured fire-rated glass featured in the Statue of Liberty National Monument, a world heritage site and national landmark that is truly the symbol of liberty and international friendship,” said John Crowe, President and CEO of Saint-Gobain in North America. “The people of France gave the Statue to the U.S. over 100 years ago, and this international connection continues as the fire-rated glass, critical to the renovation of this icon, was manufactured in the U.S., in Washington State by Saint-Gobain, a company originally founded in France to make the glass for another of the world’s iconic landmarks, the Hall of Mirrors at Versailles.”
 
Prominent French architect and structural engineer Alexandre-Gustave Eiffel designed a 92-foot tall pylon to be the primary support structure of the statue’s interior. The “Eiffel beams” create an exposed flexible suspension system, and the renovation team was strictly prohibited from altering it. The new enclosed fire stairwell had to be delicately installed between the crisscrossing beams without imposing on them, and a new oculus was installed to provide additional light transmittance.
 
“The main goal of the renovation was safety, but it was critical that we accomplish it without harming the historical qualities of the building so that the amazing visitor experience of traversing Lady Liberty was preserved,” said project architect Michael J. Mills, FAIA, Partner, Mills + Schnoering Architects. “Enclosing one stairwell in fire-rated glass was crucial to our safety goal, and with Vetrotech we found a clear fire-rated glass solution that would deliver the safety we needed while still allowing visitors to enjoy the historic fabric of the monument.”
 
The renovation’s project team also included general contractor Joseph A. Natoli Construction Corporation and glass contractor Smith Glass (responsible for specifying Vetrotech’s product).
 
About Vetrotech Saint-Gobain
Vetrotech Saint-Gobain is a leading producer of fire-resistant glass products with more than 30 years of experience. Our products are available world-wide over a network of local sales offices and regional production facilities. We research, develop and produce clear fire-resistant glass solutions for maximum protection of people and property; our glass combines both form and function, accommodating impact safety, multi-comfort, security and decorative features. A diverse range of product technologies and manufacturing processes makes our approach unique. It allows us to propose the most appropriate solution, and offer the full spectrum of fire resistance classifications, to meet virtually any challenge. We are continually testing and certifying our glass within the industry's most stylish fire-resistant framing systems and glazed building elements. As a result, we can offer the most diverse range of applications, to be integrated perfectly along-side non-fire glass types. To learn more, visit www.vetrotechUSA.com.

600450 Lady Liberty Renovation Bolstered by Vetrotech Saint-Gobain’s Fire-Rated Glass glassonweb.com
Date: 11 July 2013
Source: www.vetrotechusa.com

See more news about:

See more from these topics:

Others also read

The technology line at POLFLAM production plant shall be expanded by a new tool, i.e., a glass processing centre.
A multi-million pound project to create an exclusive residential development in a Cheshire conservation area has demonstrated how Promat UK’s high performance, fire-resistant glass range represents the assured choice for developers.
GGI announced the launch of their refreshed website, with updated page layouts and product photography to further improve the user experience.
The BR frameless system allows for fire-resistant doors to be installed as part of the partition.
dhf (Door & Hardware Federation) has welcomed recommendations made in the Independent Review of Building Regulations and Fire Safety’s Interim Report, published on 18 December.
In just two months, POLFLAM will present their products in Germany on the Expo FeuerTRUTZ 2018.

From industry

101 Venture Way
Secaucus, NJ 07094-1808
United States

Add new comment