Bonds which have so far been regarded as difficult can now be achieved easily and safely thanks to the Verifix® glass bonding table. In particular, when it comes to complicated 45° bonds, the sturdy table comes into its own: Mitre stops and counterweights facilitate the precise positioning of the glass parts towards each other. With the aid of the supplied Verifix® Pro angle suction holders, the required layer thickness of low- and medium-viscosity adhesives can be precisely applied. The smart lamp fixing aid positions the UV lamp in the right angle and distance to the bonding surface and thus guarantees uniform and adequate curing of the UV adhesive used.
The Verifix® bonding table ensures a UV bonding process security unheard of so far: On the one hand this is due to superior bonding precision and easy handling of the device and on the other hand well thought-out and repeatable processes guarantee a high degree of safety.
The bonding table is available in three different sets: Set 1, including the bonding table, the lamp 90° fixing aid, two counterweights and two angle suction holders Verifix® Pro 90°, allows for rational 90° bonds. Set 2 is suited best if you wish to realise both 90° and 45° bonds: Apart from the bonding table it comprises two lamp fixing aids suitable for both angles, two counterweights, two 45° mitre stops and a pair of Verifix® Pro angle suction holders.
Nevertheless, all components of the set are also available separately: The table can also be retrofitted at a later point in time and is therefore easily adapted to changing needs.