Whether trying to keep the warmth inside in cold climates or trying to keep the heat outside in warm climates – Linetec helps optimize aluminum architectural manufacturers’ systems to meet thermal requirements in all climate zones.
Linetec enhances the thermal performance of architectural metal products, such as window, skylight, curtainwall, storefront and entrance systems.
Using a thermal barrier system improves performance by separating the aluminum profile into two parts, while maintaining the structural and long-term durability of the unit. The two methods for doing this are:
- Polyurethane poured-and-debridged thermal barrier systems
- Polyamide insulating strips (thermal strut)
While both methods achieve high thermal performance, thermal strut also simplifies dual finishing, where the interior and exterior surfaces may be finished in different colors and formulations.
Curves and Corners
There’s no need to sacrifice creative design for thermal performance or condensation resistance. Beyond linear extrusions, thermal improvement services are available for
Installing the thermal barrier in the metal after it has been formed helps minimize stress on the thermal barrier and ensures performance as specified.
Linetec performs all these services in the proper order, to industry-leading quality assurance standards, and in the same location to retain the full warranty.
Learn more about thermal improvement and finishing services by clicking here.
If you’re attending the American Institute of Architects (AIA) national conference and Architecture Expo, please visit us in person at booth #3353 in the Orange County Convention Center in Orlando. The exhibit hall is open April 27 and 28, 10 a.m.-4 p.m.; April 29, 8:30 a.m.- 12:30 p.m.