| Products |
 |
For.El. Presents New Machinery
|
 FOR.EL. never falls short in regards to proposing new machinery. The new products are interesting, innovative and high-tech. First of all the new version of the automatic arrissing machine can be broached. It does not replace the old machine it completes it. In particular, this machine allows operations on shaped glass, both straight and non rectilinear, and glass of small measurements (320 mm x 180 mm).
Respecting the working principals of the former version, FOR.EL. S.p.A. once again launches the use of the feeler situated on the operating head which, preceding the diamond wheel, runs along the glass edges supplying correct data of their shape. Two sensors record in real time these characteristics and their feedback carries out the correct positioning of the diamond wheel.
Above all productivity is considerably increased in this version. As a matter of fact, the use of two operating units, installed in a cascade connection, consents arrissing on two glass panes at the same time. While the first unit works on the first vertical and on the upper horizontal side of the glass pane, the second, in relation to the length of the glass pane, works on the lower horizontal and then on the second vertical side. During this latter phase a second glass pane can already start operations at the first operating head. A reduction in work time and great flexibility are accordingly realized. And more over: the combination of the two different types of arrissing machine, combined with the multi-arrissing tool configuration, can carry out the flat/raw/polished edge in vertical position.
Flexibility is also a peculiar characteristic of the automatic line for FOR.EL. Super Spacer®. Double glazing of different shapes can be realized with this line thanks to the use of the automatic FOR.EL. Super Spacer® applicator and to the FOR.EL. hot-melt automatic sealing machine. The Super Spacer® applicator, presented last year at the Glasstec in Duesseldorf, has been significantly refined in its performance. A continuous strip of spacer profile is wound around a bobbin and directly applied on one of the two glass panes in order to form a closed frame; this is all carried out in the same production line of the double glazing. The FOR.EL. Super Spacer® applicator introduces some essential and innovative mechanisms that allow placing the spacer frame on the glass pane in a cheaper, more functional and more reliable way. At the same time a more exemplary job is attained, especially on the corners.
Other made in FOR.EL fundamental machines that the VITRUM visitors were able to see in operation at the FOR.EL. stand cannot be disregarded. The vertical cutting line for small, medium and large panes combined with the automatic stock selector and with the automatic loader, completed by the semi-automatic edge breaking machine; the automatic profile bender; the automatic desiccant loader; the butyl rubber extrusion plant in combination with the loading/unloading system of the spacer frames; lastly, the automatic coating remover for low-E glass and the automatic structural sealing machine.
|
December 27th, 2005
Source: For.El. |
Add a Comment
|
You have to be registered in order to add your comment.
If you already have an account, please sign-in to comment.
|
|
|
|
