Glass-on-glass lamination for large-area OLEDs right from the roll

 Glass-on-glass lamination for large-area OLEDs right from the roll
Photo source
© Fraunhofer FE

Date: 5 May 2016

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP will be presenting flexible organic light-emitting diodes (OLEDs) at AIMCAL 2016 in Dresden, Germany, from May 30th to June 2nd, 2016.

These OLEDs have been fabricated on ultra-thin glass and encapsulated with a ultra-thin glass foil in the same process.

Organic light-emitting diodes have already found acceptance as a light source in first luminaires on the market on rigid glass.However, far larger shares of the market could be acquired, if flexible large-area OLEDs could be manufactured cost-effectively with consistent quality. Scientists are working feverishly on this worldwide.

Large-area OLEDs could be employed not only in innovative furniture designs, but also deliver good service in other sectors requiring specialized curved design, such as architectural lighting and automotive, for example. The organic layers of the OLED are sensitive to oxygen and moisture and needs to be well protected.

Flexible ultra-thin glass meets the stringent requirements of a hermetic barrier, free of defects and pinhole freedom for large OLED emissive surfaces.



Fraunhofer FEP has had success not only in applying OLEDs to flexible ultra-thin glass, but also in encapsulating the devices using an additional thin glass layer in a single roll-to-roll manufacturing step. A high-performance adhesive was applied over the entire surface of the encapsulating glass in advance in collaboration with tesa SE.

This adhesive glass film is subsequently laminated to the OLED-coated ultra-thin glass. Fraunhofer FEP will be presenting this type of OLED at AIMCAL 2016, in this case based on G-Leaf™ ultra-thin glass by Nippon Electric Glass Co Ltd. (NEG). A 10 cm × 25 cm emissive surfaces will be on display.



“But encapsulation is not the only challenge for flexible large area OLEDs that need to remain stable over long periods. In order to get them to emit, a highly conductive, transparent oxide layer with good light coupling properties is required and reliable electrical contacts to the emitting layers with low contact resistance is essential," explains Dr. Stefan Mogck, Head of Roll-to-Roll Organic Technology at Fraunhofer FEP. “We are proud of having optimized our process, and that these layers can be applied very homogenously to the flexible glass.”



Making dependable electrical connections to the ultra-thin glass without damaging it was especially challenging. The scientists will be working with customers in the future on non-destructive techniques of integration.



Fraunhofer FEP offers its industrial partners process and product development over the complete value chain customized to their requirements. Processes for treatment and coating flexible glass for customer-specific emissive surfaces in different sizes and colors can be developed, and even flexible OLED prototypes fabricated at customers’ requests. In addition, the Institute can develop matching driver circuitry for supplying power to the prototypes.

 

Fraunhofer FEP at AIMCAL 2016

Talks



Monday, May 30



Session: Coating and Laminating Short Course



13:30 – 17:00, Location: Bellevue I



Oliver Miesbauer, Fraunhofer IVV / Dr. rer. nat. John Fahlteich, Fraunhofer FEP







Tuesday, May 31



Track: Web Coating and Web Handling,



Session: Web Surface / Barrier



14:30 – 15:00, Location: Bellevue I



Surface modification of polyethylene terephthalate (PET) and oxide coated PET for adhesion improvement



Juliane Fichtner, Fraunhofer FEP







Track: Vacuum



Session: Sputtering, Coating Equipment, Inline control



16:00 – 16:30, Location: Bellevue II



Adapted particle bombardment during layer growth by pulse magnetron sputtering



Dr. rer. nat. Daniel Glöß, Fraunhofer FEP







Wednesday, June 1



Track: Vacuum



Session: Pretreatment, Substrate Film, Simulation



10:30 – 11:00, Location: Bellevue II



Vacuum plasma treatment and coating of fluoropolymer webs – challenges and applications



M.Eng. Cindy Steiner, Fraunhofer FEP







Thursday, June 2



Track: Vacuum



Session: New Applications, Emerging Technologies, Capacitors, Photovoltaic



8:30 – 9:00, Location: Bellevue II



New vacuum coating technologies for metal strips and foils



Prof. Dr. rer. nat. Christoph Metzner, Fraunhofer FEP







10:30 – 11:00, Location: Bellevue II



Present status of Roll-to-Roll Fabrication for OLED lighting



Michael Stanel, Fraunhofer FEP











Labtour



Fraunhofer FEP



June 1, 2016



Fraunhofer FEP invites you to an exciting tour to our labs: applied R&D for the industry at its best. During the tour, we will present pilot scale experimental coating equipment, e.g. MAXI (in-line vacuum coating for metal strips and sheets), coFlex® 600 (roll-to-roll pilot sputter roll coater), novoFlex® 600 (roll-to-roll pilot coater), atmoFlex (non-vacuum roll to roll coating and electron beam surface treatment) and a roll-to-roll process line for the deposition of OLED.

600450 Glass-on-glass lamination for large-area OLEDs right from the roll glassonweb.com

Others also read

Enhanced solar control glass with exceptional performance
Şişecam will take part in the International Solar Energy and Technologies Fair Solarex Istanbul, held at the Istanbul Expo Center from April 4th to 6th.
Registration is now open for the FGIA 2024 Summer Conference, taking place June 3-6 in Montreal, QC at Le Westin Montréal.
The Glass & Glazing Federation (GGF), FIT Show and FENSA have announced the launch of Glass Conference, an annual education and networking platform for the glazing industry.
The trade fair duo of Fensterbau Frontale and Holz-Handwerk returned at the usual time in spring - with great success.
On 20 March 2024, Glass for Europe held its annual General Assembly in Brussels, bringing together senior executives and committee chairs from EU-based float manufacturers.

Add new comment

From industry

İçmeler Mah. D-100 Karayolu Cad. No:44A,
34947 Tuzla,/İstanbul
Turkey

NEWS RELATED PRODUCTS

A+W Software GmbH
Horn Glass Industries
Unelko Corporation