6K Hydrophobic Surface Protection System

Date: 23 November 2012
Source: www.totalglassfittings.co.uk
NEW surface protection system specifically designed to protect both Glass and Stainless Steel. 6K is a 2 step surface protection treatment with a 3 year protection lifespan.

Features 2 Step Process Nano-Technology 3 Year Protection Lifespan Long Lasting Coverage 100m2 (1000ml bottle) 50m2 (500ml bottle) 25m2 (250ml bottle) Non-Toxic UV Stable Conforms to EN 45001 Abrasion Resistance Silica based solution - most commonly found in nature as sand or quartz, - Non Silicone. Stage One - Pre CleanPreparation of surface with CRL6K Pre-cleanMake sure all surfaces are thoroughly cleaned using a non silicone based cleaner.Spray the dry surface with CRL6K Pre-clean and rub the product into the surface with the pre-cleaning cloth (red). Due to the rapid evaporation of the ethanol divide larger areas into sections for treatment of about 0.25m2. The surface is ready when no more streak formation is evident.

Stage Two - Protect

Coating with CRL6K Protect

After pre-cleaning with CRL6K Pre-clean, spray CRL6K Protect onto the surface and spread around with the coating cloth (blue).



When applying the CRL6K protection, treat only small surface areas at a time, using 2 trigger sprays per 0.25 mtrs/sq and polish the product into the surface until clear. It is important to cover the full surface area but do not apply excessively, ensuring all of the coating is polished onto the surface using the 6K cloth (blue).




If residues are still apparent, repeat the process. At least 24 hours after application, if a glass cleaner is to be used on the surface, a non silicone or detergent based cleaner must be used. CRL AC6050 Cleaner is recommended.



Reaction Time and Quality Control

Immediately after the application of CRL6K Protect, the nanoparticles form a strong bond with the surface in a chemical reaction. After only a few minutes the water spray test will show good droplet formation. After about 24 hours the reaction is completed and the coating is fully durable.



Even before completion of the reaction CRL6K Protect can be touched and can come into contact with moisture immediately after coating. Do not apply adhesive labels until after the 24hr curing period.

Note: Wash application cloths separately after each use – Hot washing recommended after 30m2 coverage!



Attention! When using these products all safety instructions from the data specifications or manufacturers instructions for product use must be observed.

See more news about: